Відео

What type Bosch router is used please? In the process of building one myself.

Great to see another video from you Mike. Hope all is well with you. Until the next one. Be safe.

The videos I've watched up till yours a compass was used. I don't have a compass. Sure am glad I came across your video. Easiest way I've seen to make the octagon and no compass needed. Thanks a million.

Awesome project! Where did you buy your veneer?

it has a tune feature you can adjust print and extrusion speed and nozzle and bed temp while printing

Great idea!You are after my own heart.

When doing a how to video put the camera two miles back dont show anything speed up the video and play HOMO music so people will got WTF is he doing

Hello Michael good to see you upload again

Why is EVERYTHING on Amazon? I don't have or want an Amazon account. Do any brick and mortor stores carry misting nozzles?

Nice renovation...your neighbor needs to cut his grass.😂

Where did you get the misting tips? I'm trying to turn my hose-end sprayer into a mister. Thanks!

What if you have a red wire coming out of your Unisaw motor? I have a 220 volt single phase motor

It does not require a pressure motor. This works very well, do you run it with single tap only or does it use a motor as well?

God bless you...I love you...this will complete my project 😍😍🥳

Hello Michael, I saw a UA-cam where you were having trouble with your X-axis not moving. Did you eve get that fixed? You know how hard it is to get help with an Atezr so I thought maybe with your past experience you might be able to help me. I had to take the cover off of the X-axis gantry and the belt seemed a little loose. I could not find any information on how to Adjust the X-axis belt so I just out the cover back on. The when I turn it on it made a lot of noise like the belt skipping the gear. I opened it back up again an now the belt is very tight. Something I did might have caused the problem that's when I took out the 1" long screw at the end. when taking the cover off. I thought maybe that is the adjustment screw so I tried running it in and out. Testing each time but the belt stays tight. Can you throw me a rope?

Would like to see how to cut the angle of the 2 x 6 down to 3 1/2 inches

You did a great work👍. Very low cast. 💲 Lucky wife 😉😉😉

Has anybody had success burning lines into the face of a platter?

Absolutely beautiful snare drum. Kudos to you.q

seems excessive for what you're using it for. Now if you a boom sprayer on the back for ferts and such you would get 5 stars. Clever mount

LONGER Morther‘s Day Special Discount save up to $1000 From 9th May to 24th May, please click: bit.ly/3WzmXOv

Thanks, Michael. I’ve been racking my brain trying to figure out how to mount my grabber. Bought the PVC pipe today and made the mount. I’ll install it tomorrow. I appreciate you DIY guys!

Does it Self-Level? I have the Ender V2 and I'm about to toss it against a wall. It stopped working and I've re-levelled the bed like 10 times and it will not print. I don't know what is going on with that machine.

He’s back, hurrah!

Good idea. Now a bucket mount would complete the job.

My goofy dog fell into our access area today. He's alright, but I certainly don't want to take that risk again!

CAN I USE THIS LASER TO SQUARE MY XY VISE, SO WHEN I MOVE IT TO CUT WHILE BIT IS TURNNING I WILL CUT IN A LINE THAT IS SQUARE TO MY BIT..

The piece you asked about is most likely a harness point for drum line.

Can you give us the list of tools you used? Thanks.

Mike this thing looks like it would work perfect back at our crusher keeping dust down.

Should use an eye bolt so you can use it for tie down

I had a very similar problem with my P20 and it began a couple months after I got it. I had been using it quite a bit by this time. Mid job it lost left-right control. I checked everything, several times and eventually, I found that one of the wires that go into the male connectors for the stepper motor on the gantry had shorted out right at the connection and the wire had separated from the connector. It was very hard to see as it was right as the wire entered the back of the connector. I ordered new wire tabs for the connector and that fixed the issue. But since this has happened again this time at the connector at the laser. I did the same fix and it works fine again. Unfortunately, I had the same problems with the customer service. My P20 does not do grey scale so it takes 5 times longer to do a small image... Never got a working answer to fix this problem. I am not very happy with this laser. Hopefully you have since solved the problem.

LOL “we’ll that sucked” yup I’m sure it did, I know the feeling😂

Best of luck to you!

Thank you Mike, you are one of the UA-camrs who i conaider ine of my teachers. I have learned and been inspired by things from your videos and witbout your contribution, along with other youtubers, i may not have been calling myself a woodworker today.

Mike, 8 years ago I got sick, leaving me 1,5 year stuck at home with not more energy than watching YT videos. That's when I discovered your (and some other's) channel. I was mainly interested in your videos on the lathe, because I just bought myself one. You helped me recover and I thank you sincerely for that. I stuck around and I hope you will too. Don't make posts for the money, that's not the right motivation. Do it because you want to share and maybe educate. Stay sane, and thank you from me in the Netherlands.

As a guy who has made this my living, I feel ya Michael. Sounds like the YT path you thought you had to take, wasn't the one you wanted. Whatever you do, chase your joy man. If you love building things, build things. If you don't like filming it (I am WITH YOU on that front) then don't. With that said, I wanted to pass on a bit of advice. Don't turn off monitization. By doing so, you only change one thing. YT will still run ads, and still collect money. The only difference will be that they keep your share. I can't see any logic in that. The $1,200 you made last year would pay for a stellar tax person to handle your taxes for you. Trust me, once in a while, you'll make a video that just really resinates with a larger audience, and it'll make you $20k-30k. It happens. If you turn off monitization, and that moment comes, YT will still get their money, and keep yours. No point in that.

Thanks for the content and your hard work!

I'm glad you are keeping your content available. I have videos that I refer back to at times. Thank you to all the support you've given your followers

Always enjoyed your content, best of luck to you!

You got to do what is best for you and your family! Best Wishes, Mike!

So sorry to hear... Good Luck going forward!!

Sorry to hear this Mike, but fully understand. Thanks for all your projects, wisdom you’ve shared over the years. I really enjoyed your videos and projects. Best wishes in your next ventures in life.

Sorry to see you go

Hey Mike, I am glad you are still going to be around! Have been doing the same thing! Your friend Bob Lee

Best of luck Mike . . . I have enjoyed your content!

Mike, I have enjoyed your videos BECAUSE you are not the most skilled woodworker in the fanciest shop. Your projects and your struggles are relatable. As an observer, I know that the UA-cam world is changing. I'm glad you didn't switch to being a full-time content creator. Having a day job is a good thing. Take care of yourself and your family. I look forward to seeing what you post (and rewatching some of your old videos).

Thank you for the content! Wishing you the best of luck and happiness in the future!

Best of luck. Always enjoyed your efforts and style. Thank you!

Glad to hear you aren’t totally out of your video. Good luck from a fellow Hoosier.